Alterations in soil microbial activity and N-transformation processes due to sulfadiazine loads in pig-manure

Most veterinary drugs enter the environment via manure application. However, it is unclear how these substances interact with soil biota. Therefore, it was the aim of the present study to investigate the effects of manure containing different concentrations of the antibiotic sulfadiazine (SDZ) on the soil microbial communities. It was shown that manure alone has a stimulating effect on microbial activity. Only potential nitrification was negatively influenced by manure application. The addition of SDZ to the manure reduced microbial activity. Depending on the SDZ concentration, levels of activity were in the range of the control soil without manure application. Also, selected processes in nitrogen turnover were negatively influenced by the addition of SDZ to the manure, with nitrification being the only exception. The effects were visible for up to 4 days after application of the manure with or without SDZ and were correlated with the bioavailability of the antibiotic.     

Electric load management in developing countries

Energy planners in developing countries have traditionally sought to meet their nations' growing electricity demands by adding more generation and transmission capacity. But as the foreign investment situation became critical in the 1980s, private investment and system efficiency improvement programmes began to garner interest. One of the most promising system efficiency improvement options is load management, which uses a variety of techniques to utilize the electricity system's existing capacity more efficiently. However, to date, only three countries have seriously considered implementing large load management programmes: Pakistan, Peru and Costa Rica. This paper describes a 1987-89 load control demonstration programme in Costa Rica, sponsored by the US Agency for International Development (AID), in which participating industries were able to reduce their peak demand by 14%.     

Implementing In-Stream Nutrient Processes in Large-Scale Landscape Modeling for the Impact Assessment on Water Quality

For a long time, watershed models focused on the transport of chemicals from the terrestrial part of the watershed to the surface water bodies by leaching and erosion. After the substances had reached the surface water, they were routed through the channel network often without any further transformation. Today, there is a need to extend watershed models with in-stream processes to bring them closer to natural conditions and to enhance their usability as support tools for water management and water quality policies. This paper presents experience with implementing in-stream processes in a ecohydrological dynamic watershed model and its application on the large scale in the Saale River basin in Germany. Results demonstrate that new implemented water quality parameters like chlorophyll a concentrations or oxygen amount in the reach can be reproduced quite well, although the model results, compared with results achieved without taking into account algal and transformation processes in the river, show obvious improvement only for some of the examined nutrients. Finally, some climate and water management scenarios expected to impact in-stream processes in the Saale basin were run. Their results illustrate the relative importance of physical boundary conditions on the amount and concentration of the phytoplankton, which leads to the conclusion that measures to improve water quality should not only take nutrient inputs into account but also climate influences and river morphology.     

Electrochemical inactivation of cyanobacteria and microcystin degradation using a boron-doped diamond anode——A potential tool for cyanobacterial bloom control

Cyanobacterial blooms are global phenomena that can occur in calm and nutrient-rich(eutrophic) fresh and marine waters. Human exposure to cyanobacteria and their biologically active products is possible during water sports and various water activities, or by ingestion of contaminated water. Although the vast majority of harmful cyanobacterial products are confined to the interior of the cells, these are eventually released into the surrounding water following natural or artificially induced cell death. Electrochemical oxidation has been used here to damage cyanobacteria to halt their proliferation, and for microcystin degradation under in-vitro conditions. Partially spent Jaworski growth medium with no addition of supporting electrolytes was used. Electrochemical treatment resulted in the cyanobacterial loss of cell-buoyancy regulation, cell proliferation arrest, and eventual cell death. Microcystin degradation was studied separately in two basic modes of treatment: batch-wise flow, and constant flow, for electrolytic-cell exposure. Batch-wise exposure simulates treatment under environmental conditions, while constant flow is more appropriate for the study of boron-doped diamond electrode efficacy under laboratory conditions. The effectiveness of microcystin degradation was established using high-performance liquid chromatography–photodiode array detector analysis, while the biological activities of the products were estimated using a colorimetric protein phosphatase-1 inhibition assay. The results indicate potential for the application of electro-oxidation methods for the control of bloom events by taking advantage of specific intrinsic ecological characteristics of bloom-forming cyanobacteria. The applicability of the use of boron-doped diamond electrodes in remediation of water exposed to cyanobacteria bloom events is discussed.     

House sparrows selectively eject parasitic conspecific eggs and incur very low rejection costs

Most host species of obligate interspecific brood parasites are under strong selection because such parasitism, e.g., that involving evictor nestmates, is highly costly. Egg rejection is one of the most efficient host defences against avian brood parasites. Many hosts have thus evolved egg-recognition ability and rejection behaviour. However, this defensive mechanism has not evolved in most species where only intraspecific brood parasitism occurs, probably because (1) the eggs of conspecific females are very similar in appearance, making egg rejection less likely to emerge, and (2) such parasitism is frequently less costly than interspecific parasitism. Using a captive population of house sparrows (Passer domesticus) with a low breeding density, we here provide new evidence showing that this species actually has a fine capacity to discriminate conspecific eggs and to eject them (44.2% of foreign eggs ejected) while incurring very low rejection costs (4.2% of own eggs ejected). This result contradicts those previously found in high-density house sparrow populations in which very high rejection costs and very high clutch desertion rates were reported, probably as a consequence of intraspecific competition and infanticide provoked by the high breeding density. The house sparrow has only rarely been reported as the host of an interspecific brood parasite, which implies that it is a newly described example of an altricial species in which egg ejection has evolved and is maintained in response to intraspecific brood parasitism.     

Organohalogen pollutants in herring from the northern Baltic Sea: concentrations, congener profiles and explanatory factors

Organohalogen contaminants were investigated in Baltic herring caught from three catchment areas in the Baltic Sea, off the coasts of Finland. Pools of both small and large herring were analysed for polychlorinated biphenyls (PCB), dibenzo-p-dioxins, dibenzofurans, naphthalenes, camphenes (toxaphene), polybrominated diphenyl ethers and the pesticide DDT and its metabolites. PCB concentrations per fresh weight in small herring were at the same level in all catchment areas, i.e. the Bothnian Bay, the Bothnian Sea and the Gulf of Finland, revealing no hot spots and reflecting most likely long term emissions and atmospheric deposition. Differences in the levels and/or congener profiles of other contaminants between catchment areas may be explained by point sources. Similar concentrations in small and large herring in the Gulf of Finland were possibly due to their common nutrition. In the other areas, differences between small and large herring most likely reflected their different food sources.     

An FTIR investigation of isocyanate skin absorption using in vitro guinea pig skin

Isocyanates may cause contact dermatitis, sensitization and asthma. Dermal exposure to aliphatic and aromatic isocyanates can occur in various exposure settings. The fate of isocyanates on skin is an important unanswered question. Do they react and bind to the outer layer of skin or do they penetrate through the epidermis as unreacted compounds? Knowing the kinetics of these processes is important in developing dermal exposure sampling or decontamination strategies, as well as understanding potential health implications such exposure may have. In this paper the residence time of model isocyanates on hairless guinea pig skin was investigated in vitro using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometry. Model isocyanates tested were octyl isocyanate, polymeric hexamethylene diisocyanate isocyanurate (pHDI), polymeric isophorone diisocyanate isocyanurate (pIPDI) and methylenediphenyl diisocyanate (MDI). Isocyanates in ethyl acetate (30 microL) were spiked directly on the skin to give 0.2-1.8 micromol NCO cm(-2) (NCO = -N=C=O), and absorbance of the isocyanate group and other chemical groups of the molecule were monitored over time. The ATR-FTIR findings showed that polymeric isocyanates pHDI and pIPDI may remain on the skin as unreacted species for many hours, with only 15-20% of the total isocyanate group disappearing in one hour, while smaller compounds octyl isocyanate and MDI rapidly disappear from the skin surface (80+% in 30 min). Isocyanates most likely leave the skin surface by diffusion predominantly, with minimal reaction with surface proteins. The significance of these findings and their implications for dermal exposure sampling and isocyanate skin decontamination are discussed.     

Simulating forest succession after blowdown events: The crucial role of space for a realistic management

Ecological patterns vary in space and time. Therefore, when using dynamic models in ecology, the spatial aspect should not be neglected prematurely since it could possibly change the model outcomes to a considerable extent. In view of this problem, we describe here a method how to construct a non-spatial version from a spatially explicit simulation model. The principle idea is to suppress the spatial correlations of cells in a grid in time by continuously re-assigning a random neighbourhood for each cell on the grid. Since this procedure actually eliminates the spatial dimensions, it allows to quantify the unadulterated impact of spatial processes on the model results. To illustrate an important application of this approach in the context of forest management we use a grid-based model that simulates succession of Norway spruce (Picea abies (L.) Karst.) at mountainous sites after blowdown events. The output of this model is compared with the results of the deduced non-spatial version of this model regarding the predicted amount of re-growing trees. The non-spatial version dramatically overestimates the number of spruce trees on different microsites. Thus, the uncritical use of the non-spatial model might give reason to wrong management decisions that are based on too optimistic predictions. In practice, this may lead to dangerous situations, especially in mountain forests serving as protection against avalanches and landslides. This example demonstrates the successful applicability of our approach. Our method can be interpreted as a contribution to an extended sensitivity analysis: it analyses the sensitivity of the results due to structural changes of the model. This sensitivity allows one to estimate the redundancy or the necessity of spatially explicit processes in a model with regard to the parsimony principle of modelling. Since our approach is not dependent on special features of the simulation model used here, it is assumed to be applicable for other spatial models, too, and can thus be considered of general interest for a diligent model analysis.     

Combined integral and particle model for describing the dispersion,dilution, terminal layer formation and influence area from a point source discharge into a water body

Contamination of coastal water is a persistent threat to ecosystems around the world. In this study, a novel model for describing the dispersion, dilution, terminal layer formation and influence area from a point source discharge into a water body is presented and compared with field measured data. The model is a Combined Integral and Particle model (CIPMO). In the initial stage, the motion, dispersion and dilution of a buoyant jet are calculated. The output from the buoyant jet model is then coupled with a Lagrangian Advection and Diffusion model describing the far-field. CIPMO ensures that both the near- and far-field processes are adequately resolved. The model either uses empirical data or collects environmental forcing data from open source hydrodynamic models with high spatial and temporal resolution. The method for coupling the near-field buoyant jet and the particle tracking model is described and the output is discussed. The model shows good results when compared with measurements from a field study.